All the L65 models can be configured as three point linkage plows, trailing model plows or, if required, built with both capabilities. Apart from the single beam SB SERIES the L65 SERIES, with its wider beam spacings, is the most suitable frame for three point STUMP JUMP units. The L65 comes standard with 16" Shanks or STUMP JUMP. It will also comfortably accept 31" SHANKS and BIG-Y SHANKS.

The series was developed as a multi purpose design and so can be built to cater for even very special row crop requirements. Front to rear beams are 65" (1.65m) over all, but a third beam sits just behind the three point linkage hitch locations. This beam gives the L65 its ability to cater for just about any variation in shank and wheel positioning.

Three point linkage depth wheels can be mounted on the inner front to rear beams. By this means, for example, if it is required the tyres can be set to run in the furrows. By modifying the locations of the front to rear beams during manufacture an L65 frame can cater for whatever crop row spacings you require.

Accessories

	Rigid Shanks Yeoman shanks are never welded to the frame so shank spacings are always adjustable. sizes: 22inch, 26inch, 31inch and BIG-Y (which is adjustable from 20 - 36inches)
	Shear Pins Shear pins are used on all rigid shanks. They protect the shank and the plow frame and are extremely quick and easy to replace. They are also inexpensive and never jamb.
	Weed Knives Conventional weed knives or heel knives, 16" cut. Weed knives bolt to rear mount (cocks comb) for weeding and deep working in one operation.
	Splitter Blade The Splitter Blade (or shin guard) is contoured to give the maximum protection to the shank whilst keeping the same knife like leading edge as the shank.

CLICK HERE FOR BRAND INFORMATION

For a complete look at the latest Yeoman's Catalogue please click here