SCAG Mowers
|
.jpg)
DHL Information
|
|
|
|
| BendPak XPR-10C Two Post Lifts, 4.5 Tonne, Clear-Floor |
| XPR-10C |
|
EXTRA POWER / EXTREME PERFORMANCE / RUGGED
Two-post lifts, offer a wide selection of durable, safe and reliable systems for virtually every lifting application. Powerful and safe, which offer incredibly rapid lift speeds, with plenty of features to increase efficiency and productivity and with fewer serviceable parts and less necessary maintenance, the results are lower operating expenses and higher productivity. The two-post lifts have the capacity to safely lift your largest full-size pick-ups and commercial vehicles yet still provide specific lifting capability for sport and compact vehicles, both foreign and domestic.
XPR-10C is the state-of-the-art two-post lifts which has a 10,000-pound capacity clear-floor lifts that features a dual-synchro overhead equalisation system and user-friendly controls. Dual direct-drive low-pressure cylinders are used that minimise leakage and reduce the workload placed on the entire hydraulic system, saving you maintenance costs throughout the life of the lift.
Features
- 10,000-pound lifting capacity
- Wide or narrow configuration
- Single piece columns
- Single point safety release
- Dual hydraulic "Direct-Drive" cylinders
- Oversize 53" tall carriage for superior strength and durability
- Drop-end arms provide a lower pad height
- Triple-telescoping arms provide increased range for lifting point access
- Electric/hydraulic power system
- Large, 19" x 17" steel base plates
- Self-lubricating dura-glide polyethylene bearing system
- Safety locks in each column spaced every 3-inches
- Automatic arm restraints
- Heavy-duty dual 3/8" equalizer cables with oversizecable sheaves
- Padded overhead safety-shutoff bar
- Truck and van adapters standard
- ETL Approved (Pending)
Specifications
MODEL - XPR-10C
|
| Lifting Capacity* |
10,000 Lbs. / 4536 Kg. |
|
|
5,000 Lbs. / 2268 Kg. |
|
|
5,000 Lbs. / 2268 Kg. |
| Height Overall(*): |
145" / 3683 mm. |
| Width Overall (Outside of Base Plate): |
132" / 3353 mm. |
| Width (Outside of Columns): |
124" / 3150 mm. |
| Floor to Overhead Switch(*): |
141" / 3581 mm. |
| Inside Columns: |
102" / 2591 mm. |
| Reach (Front Arm Min.): |
25" / 635 mm. |
| Reach (Front Arm Max.): |
46" / 1168 mm. |
| Reach (Rear Arm Min.): |
34" / 864 mm. |
| Reach (Rear Arm Max.): |
55" / 1397 mm. |
| Min. Pad Height: |
4" / 102 mm. |
| Rise: |
69" / 1753 mm. |
| Max Lift Height (Pad Only): |
73" / 1854 mm. |
| Max Lift Height (6" Adapter): |
79" / 2007 mm. |
| Drive-Thru Clearance: |
93" / 2362 mm. |
| Motor (**): |
220 VAC / 60 Hz. 1Ph. |
| Time of full Rise: |
45 Seconds |
| Max Load per Arm: |
2,500 Lbs. / 1134 Kg. |
| |
|
An optional bolt-on top extension for columns raises the overhead bar an
additional 24". Must be ordered from factory at time of order. |
| Special voltages available upon request. |
| The design, material and specifications are subject to change without notice. |
Dimensions & Weight
- (L x W X H) - 151" x 18" x 51" / 3835 mm. x 457 mm. x 1295 mm
- 1,736 Lbs. / 789 Kg
With every XPR-10C lift you get…
- Clear-floor Convenience
- 30-Degree Rotated Columns
- Two-Lifts-In-One -
- Triple-Telescoping Arms Front
- Low-Profile, Dropped-End Frame Contact Pads
- Free Truck and Van Adapters
- Lowered Arm Tube Supports
- Automatic Arm Restraints
- Taller Lift Carriages
- Maintenance-Free Load Bearings
- Single-Piece Columns
- A column extension option (clear-floor models)
- Wide or Narrow Selection
- Dual Direct-Drive Technology
- Single-Point Safety Release
- On-The-Level
- Auto Shut-Off
- Industrial-Grade Hydraulic Cylinders
- High-Speed Hydraulics
- Durable Powder Coat Finish
- Detailed Safety Instruction
|
|
|
|
|
Email to Friend
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}